ILIX is the specialist for holemaking and high-precision cutting tools. Ilix offers a wide product range of high-quality, precise and effective products for different tasks; from dry machining with high performances twist drills (VHM) to thread production or reaming even in hundredth increment sizes. Ilix provides highest precision for today’s most demanding applications.
ILIX 6279 is a countersinks bit is designed with 3 flutes and Morse taper shank. Made of HSS relieved with the tipping point of 90°, ILIX 6279 allows better deburring qualities for chatter free operation. ILIX 6279 are made to conform with DIN 335 D standard for higher toughness and hardness.
CUTTING OF INTERNAL THREADS GSR GERMANY - GUSTAV STURSBERG -
The core hole is drilled with a twist drill. You can find the required twist drill diameter in the table. Important: The core hole for blind holes must be drilled to the tap point deeper than the required thread. We recommend to lower the core hole to the thread diameter.
Attach the tap into adjustable tap wrench or in the toolholder with ratchet for lower sizes. Pay attention that the screw thread of the arm of the adjustable tap wrench is fixed properly. Apply the tap vertically to the drilling. Rotate the mounted tap clockwise into the drilling. After each half-turn the chip must be broken by rotating back again.
Insertion Tools - HELICOIL -
HeliCoil Insertion Tools - Prewinder Type are available as both plain slotted and threaded mandrel captive & non-capitive tools ranging from size M1.6, M2 – M39 and in UNC / UNF category from 1-64 to 1-1/2”. HeliCoil insertion tools comes in variety of configurations such as Threaded Mandrel Type Insertion Tool Threaded Mandrel Prewinder tools having threaded nozzle: Tool is available as both Capitive & Non-Capitive type depending on size & pitch. Plain Mandrel Prewinder tools having threaded nozzle: Tool is available as both Capitive & Non-Capitive type depending on size & pitch. Larger insertion tool sizes are also available & made on request. HeliCoil Prewinder tools are best suited for easy & fatigue free installation of inserts in production line to achieve a high quality of HeliCoil insert installation & prevent jumping of coil threads. Threaded mandrel prewinders are also best recommended for successful installation of screw locking inserts and free running inserts having a fine thread pitch.
TURNING TOOLS - DORIAN TOOL -
External Turning and internal Turning
PARTING & GROOVING - DORIAN TOOL -
Expands the Flexibility of Multi-Operations with the combination of Shanks Sizes and Cartridges Styles.
THREADING TOOLS - DORIAN TOOL -
Free Running Inserts - HELICOIL -
HeliCoil standard range is available in Stainless Steel AISI-304/ DTD734, metric series ranges from M1.6, M2 to M56 & in unified series from UNC / UNF 1-64 to 1-1/2 inch. It is also available in strip feed or reel mounted form in strip feed form are best suited for significantly reducing the installation time using power tool for installation of inserts.
HeliCoil Inserts or Wire Thread Inserts are made of cold rolled 18-8 grade Stainless Steel to AS7245 , MIL-I-8846 & DTD734 specifications. This wire is cold rolled to a diamond cross section producing an ultimate tensile strength of approximately 1375-1725 MPa, mirror like surface finish of 2-4 Microns and flank hardness of RC 43-50 which is far in excess of the usual tapped materials and best suited for most of the industrial needs. HeliCoil Inserts can also be supplied in other materials such as SS-316, Inconel X-750, Titanium Alloys, Nimonic 90, Nitronic 60, Phosphorus Bronze, Beryllium Copper and with special coating and plating requirements.
Self Locking Inserts - HELICOIL -
HeliCoil Screw Locking Insert as standard is available in Stainless Steel AISI-304/ DTD 734 . Metric series ranges from M2 to M39 & unified series from UNC / UNF 1-64 to 1-1/2 inch. HeliCoil Screw Lock Insert is also available in strip feed or reel mounted form.
HeliCoil Locking Insert has a high reusable factor permitting frequent removal and reassembly of bolt without appreciable loss of torque. It has positive self-locking torque, complying with NASM8846, MA1565 and MIL-N-25027. It eliminates the usage of lock wiring, lock nuts, lock washers, chemical compounds, plastic pellets/ patches and other locking mechanisms. The HeliCoil Locking Inserts are subjected to extensive tests in tension, torque, shear, vibration and fatigue, conducted by the American & European companies. Its applications include sectors like Aviation & Aerospace, Electronics, Industrial, Automotive and Military.
Tangless Inserts - HELICOIL -
Emhart Heli-Coil® Tangless Inserts eliminate tang break-off and retrieval and are easily adjusted or removed after installation. The Bi-Directional Design installs quickly and easily from either end of the insert. HELI-COIL Tangless inserts have a bi-directional design allowing the insert to be installed from either end Tangless inserts are available as free running & screw locking Types, with all regular coatings.
Heli-Coil Tangless screw lock inserts provide a positive, self-locking torque and comply with both MIL-I-8846 /NASM8846 and NAS1130 requirements. Typical Tangless NAS1130 Parts can be identified as in the product linecard available at this site.