contact us now for any question

Recoil Tools Spark Plug Kit Trade Series Kit

GENERAL CATEGORY

HELICOIL SERANG - Recoil Tools AFS supplies a range of associated Recoil tooling to facilitate Recoil insert installation. The advantage of the Recoil tooling system is its simplicity, versatility, and ease of use. The hand installation tooling range includes the manual installation tool, the semi production “Prewinder” type, as well as manual and spring operated tang break off tools

Need Help : +62 254 7915190

Order by phone : : +62 254 7915190

Order by email : : sales@atsejahtera.co.id

Deskripsi Detail

HELICOIL SERANG - Trade Series Kit Recoil’s innovative and cost-effective thread repair kits are utilized worldwide in industrial and automotive maintenance situations. Each kit contains:1 New combo tap and installation tool - tap wrench no longer required 2 Magnetic Tang Break Tool - for easy tang removal in blind holes 3 H.S.S. DrillSpark Plug Kit Spark plug kits have pilot nose taps for accurate self alignment eliminating the need for drilling. The table below denotes the Recoil Insert Kit part numbers for each available thread size together with details of insert quantities included with each thread repair kit.

HELICOIL SERANG - Manual Installation Tool The standard Recoil insert installation tool is the most practical and simple to use for general applications. This tool may be used to install 1D through to 3D length inserts, but care must be taken to ensure that the adjustable collar is correctly set to suit the particular type and length of the Recoil insert. If the collar is incorrectly set, the insert will not drive properly and the tool may slip off the tang as the insert enters the hole. For general use, the collar should be adjusted such that the insert tang is positioned mid-way along the slot with the insert coils compressed. This will allow the insert free movement to suit the parent material thread pitch during installation. If the installation tool is used to break off the tang, then it must be lifted clear of the insert following installation and replaced into the insert at 90 degrees to its drive position. This ensures that the tool is correctly placed on the insert tang. Tap the tool sharply downward to produce a clean tang break. Note: The manual installation tool is not recommended for the installation of locking inserts.Note: Recoil manual tools are not recommended for use with other brands of wire thread inserts

PODUK YANG SAMA

- Slide Right or Left for Next Product -

Detail Product